Picking the right ridge vent is an important step for your roofing project. A ridge vent is installed at the peak of a sloped roof and then covered with a metal cap. It is designed to allow air to flow freely from the attic. You can increase your energy efficiency and increase the life of your roof with a properly installed ridge vent.
We understand that each roofing project may have different requirements and even a budget. Here at Levi’s Building Components, we provide several solutions for ridge vents, which include: FloVent®, FloVent R120, FloVent R115, FloVent 9, and FastVent Plus.
FloVent 112 and FloVent 134
ITEM # |
DESCRIPTION |
LENGTH |
WIDTH |
PCS/BOX |
LB/BOX |
FV112 |
1-1/2” for 7/8” or lower rib heights |
10’ |
2” |
10 |
4.5 |
FV134 |
1-3/4” for 1-1/4” rib heights |
10’ |
2” |
10 |
5.2 |
FloVent R120 and FloVent 9
FloVent R120
FloVent R120 is a simple solution for varying roof profiles. The polyether foam compresses and conforms into every void between the ridge cap and roof panel to prevent weather element damage. This ridge vent product fits any roof panel configuration and can be used with any manufacturer’s ridge cap. The open-weave scrim tape offers a stronger, wider grip than glue strips and allows for easy one-man installs until the ridge is fastened with the ridge cap. Additionally, being both fire retardant and UV stable, this ridge vent prolongs the life of your roof.
FloVent 9
ITEM # |
DESCRIPTION |
LENGTH |
WIDTH |
PCS/BOX |
LB/BOX |
FVR120 |
1" thick for 7/8" or lower rib heights |
20’ |
2” |
10 |
7.2 |
FV9 |
1" thick for 3/4" |
20’ |
2” |
75 |
117 |
FloVent 115
ITEM # |
DESCRIPTION |
LENGTH |
WIDTH |
PCS/BOX |
LB/BOX |
FV115 |
1" thick for 7/8" or lower rib heights |
20’ |
1-1/2” |
150 |
97.5 |
FastVent Plus
FastVent Plus provides ventilation and uniform air flow for the proper maintenance of metal rooves. These uniquely engineered, breathable closure strips eliminate any leak paths into the ridge area by completely sealing against the panel profile. This form-fit reduces wind-driven rain problems to a minimum. Closed-cell polyethylene completely surrounds the open-cell venting foam. This profiled metal roofing ridge vent is designed for AG and R metal panels.
ITEM # |
DESCRIPTION |
LENGTH |
WIDTH |
FT/BOX |
PCS/BOX |
LB/BOX |
FASPLU |
FastVent Plus |
3’ |
1-3/4” |
75' |
10 |
4.5 |
FV134 |
FastVent Plus |
3’ |
1-3/4” |
60' |
10 |
5.2 |
Make Your Ridge Vent Choice!
Picking the right ridge vent may be a challenge. There are several points to factor in when deciding your roof ridge vent. This can include your existing ventilation, the shape of your roof, wind direction, and sometimes the climate your building is located in. It’s always good to receive advice from an expert, so be sure to call a Product Specialist here at Levi’s Building Components with any of your ridge vent or other metal roofing questions!